Corques Liquid Lino
The liquid, sustainable linoleum floor
Coming soon:
RENOLEUM
the Liquid Lino
with recycled
proportion!
Corques Liquid Lino is a liquid linoleum primarily composed of natural and renewable materials. Its main components include plant oils, linseed oil, and cork granules. Wood flour and ground limestone enhance the texture and appearance, while natural pigments are used for coloring. Corques Liquid Lino is entirely free of plasticizers, allowing indentations to recover even after many years. The liquid application eliminates the need for adhesive during installation. Its seamless appearance over large surfaces meets both high aesthetic and hygienic standards.
Picture gallery
Corques Liquid Lino is the optimal flooring for areas with high design requirements; therefore suitable, among others, for: educational sector (kindergartens, schools, universities, medical sector (hospitals, doctors’ surgeries, homes for the elderly and nursing homes), representative areas (shopping centres, offices, hotels, exhibits, museums).
Advantages
Technical
- Low maintenance
- can be revitalised at low cost
- dirt-repellent and easy to clean (no waxing necessary)
- wear-resistant to signs of use and wear (scratches, chair castors)
- resistant to chemicals, acids, alkalis, resins, solvents
- permanently flexible and dimensally stable
Ecological
- made from renewable raw materials
- free from plasticisers, volatile organic compounds (VOC), chlorine, PVC, phthalates
- zero waste, as there is no cutting waste
- EPD-certified
- climate positive
- no adhesives required
- residue-free degradable, 100% recyclable
Optical
- high resilience of furniture impresss
- good colour stability
- natural aesthetics
- even surface with matt effect
- available in 54 colour variats
- in special colours on request
- on request with silky matt surface
Health
- noise-reducing
- odourless
- highest standard of hygiene
(easy to clean and disinfect)
Health
- noise-reducing
- odourless
- highest standard of hygiene
(easy to clean and disinfect)
Optical
- high resilience of furniture impresss
- good colour stability
- natural aesthetics
- even surface with matt effect
- available in 54 colour variats
- in special colours on request
- on request with silky matt surface
Colours
Load classes
Load class 23
DIN EN ISO 10874 Residential area • heavy (minimum thickness 2 mm)
Load class 34
DIN EN ISO 10874 Object area • very heavy (minimum thickness 2 mm)
Load class 43
DIN EN ISO 10874 Light industry • heavy (minimum thickness 2.5 mm)
Technical properties
Impress and residual impress behaviour
EN ISO 24343-1 • 0.03 mm
Furniture indentat behaviour
EN 424 • No damage
Abrasion behaviour
ASTM D4060 -14 • CS17 • Wheels/10N/1500 cycles • 55 mg
Electronic behaviour
EN 1815 • < 2 kV
Light fastness
EN ISO 105-B02 • 7 – 8 • ASTM F-1515 • 7 – 8
(1- Strong, 8- No change)
Pliability
EN 435 • 20 mm, no cracks
Chemical resistance
EN ISO 26987 • No change
Stain sensitivity
EN 423 • Category 1+2: Level 5, Category 3: Level 4/5
Resistance to cigarette burns
EN 1399 • Proc A (stub out) ≥ level 4 • Proc B (burn) ≥ level 3
Thermal conductivity
EN ISO 12524 • 0,15 W/m*K • Suitable for underfloor heating
Thermal insulation
DIN EN 12464-4 • 0,027 m²*K/W
Thickness change with moisture
EN 13329 • < 0,8%
Watertightness
EN 13553 • Waterproof
Suitability for damp locations
EN 426 • Suitable
Chair castor suitability
EN 425 • 25.000 • Slight change in appearance • no detachment
Sound insulation, impact sound improvement
EN ISO 717-2 • ΔLw = 8 dB Corques • 15 dB Corques Comfort
Fire behaviour
EN 13501-1 • Bfl-S1 • Class 1
Slip resistance
DIN 51130 • R9 Standard / R10-R11/R12 on request
Slip resistance
EN 13893 • DS: ≥ 0,30
EPD value GWP global warming potential
according to ISO 14025 and EN 15804 (cradle-to-cradle A – D) <= – 7,72 kg CO2 – equivalent per m² = climate positive
Contains recycled material
Technical system data
Layer thickness: 2–3 mm
Density: 0,96 kg/dm³
Compressive load: approx. 20 N/mm²
Flexural strength: approx. 14 N/mm²
Adhesive strength: 3 N/mm²
Elongation at break: 130 %
Binder: biopolymer, linseed oil
Set to foot traffic: after 24 hours
Fully cured: after 7 days at 20°C
Hardness: approx. 65 Shore D
Colours: 54 colours, special colours on request
Downloads
Corques Liquid Lino Produktdatenblatt
Corques Samplemap P&K
Biopolymere als Bodenbelag
PDF Download (678 KB)
Customer notice
PDF Download (83 KB)
Customer notice costs
PDF Download (200 KB)
Duracryl Reinigungs- und Pflegeanleitung (Wohnbereich)
Duracryl Reinigungs- und Pflegeanleitung (Objektbereich)
"*" indicates required fields