Duracem

The sustainable trowelled floor in concrete look

Duracem is an innovative, seamless biopolymer-based floor covering. It contains up to 50% recycled material, as well as vegetable oils and minerals. Purely natural colour pigments complete the subtle colouring of the concrete look.​

Picture gallery

Duracem is the optimal flooring for areas with high design requirements: educational sector (kindergartens, schools, universities), medical sector (hospitals, doctors’ surgeries, old people’s and nursing homes), representative areas (shopping centres, offices, hotels, exhibitions).

Duracem Spachtelboden – Cafeteria
Duracem Spachtelboden – Cafeteria

Advantages

Duracem is convincing from a technical, ecological, optical and health point of view:

Technical

  • low maintenance
  • can be revitalised at low cost
  • dirt-repellent and easy to clean (no waxing necessary)
  • wear-resistant to signs of use and wear (scratches, chair castors)
  • resistant to chemicals, acids, alkalis, solvents
  • permanently flexible, but dimensionally stable

Ecological

  • made from renewable raw materials
  • free of plasticisers, volatile organic compounds (VOC), chlorine, PVC, phthalates
  • zero waste, as there is no cutting waste
  • no adhesives required
  • climate-friendly
  • can be removed without residues and 100% recycled

Optical

  • high resilience of furniture impressions
  • good colour stability
  • natural aesthetics
  • even surface with matt effect
  • Available in 12 colour variations
  • on request in special colours
  • on request with silky matt surface

Health

  • noise-reducing
  • odourless
  • highest hygienic standard (easy to clean, disinfectable)
  • recommended for allergy sufferers
  • non-slip version possible

Health

  • noise-reducing
  • odourless
  • highest hygienic standard (easy to clean, disinfectable)
  • recommended for allergy sufferers
  • non-slip version possible

Optical

  • high resilience of furniture impressions
  • good colour stability
  • natural aesthetics
  • even surface with matt effect
  • Available in 12 colour variations
  • on request in special colours
  • on request with silky matt surface

Load classes

CLASS 23 DOMESTIC HEAVY

Load class 23

DIN EN ISO 10874 Residential area • heavy (minimum thickness 2 mm)

FCSS-Class-34

Load class 34

DIN EN ISO 10874 Object area • very heavy (minimum thickness 2 mm)

FCSS-Class-43

Load class 43

DIN EN ISO 10874 Light industry • heavy (minimum thickness 2.5 mm)

Technical properties

Icon Eindruck und Resteindruck

Impression and residual impression behaviour

EN ISO 24343-1 • 0.03 mm

Icon Einfluss von Möbelfüßen

Furniture indentation behaviour

EN 424 • No damage

Icon Abriebverhalten

Abrasion behaviour

ASTM D4060 -14 • CS17 • Wheels/10N/1500 cycles • 55 mg

Icon elektrostatischen Verhaltens

Electronic behaviour

EN 1815 • < 2 kV

Icon Farbechtheit

Light fastness

EN ISO 105-B02 • 7 – 8 • ASTM F-1515 • 7 – 8
(1- Strong, 8- No change)

Icon Biegsamkeit

Pliability

EN 435 • 20 mm, no cracks

Icon Chemikalienbeständigkeit

Chemical resistance

EN ISO 26987 • No change

Icon Fleckempfindlichkeit

Stain sensitivity

EN 423 • Category 1+2: Level 5, Category 3: Level 4/5

Icon Widerstandsfähigkeit gegen Zigarettenglut

Resistance to cigarette burns

EN 1399 • Proc A (stub out) ≥ level 4 • Proc B (burn) ≥ level 3

Icon Wärmeleitfähigkeit

Thermal conductivity

EN ISO 12524 • 0,15 W/m*K • Suitable for underfloor heating

Icon Wärmeisolation

Thermal insulation

DIN EN 12464-4 • 0,027 m²*K/W

Icon Dickenänderung bei Feuchtigkeit

Thickness change with moisture

EN 13329 • < 0,8%

Icon Wasserdichtheit

Watertightness

EN 13553 • Waterproof

Icon Eignung für Feuchträume

Suitability for damp locations

EN 426 • Suitable

Icon Rutschfestigkeit

Chair castor suitability

EN 425 • 25.000 • Slight change in appearance • no detachment

Icon Schallschutz

Sound insulation, impact sound improvement

EN ISO 717-2 • ΔLw = 8 dB Duracem • 15 dB Duracem Comfort

Icon Brandschutzklasse

Fire behaviour

EN 13501-1 • Bfl-S1 • Class 1

Icon Rutschhemmung

Slip resistance

DIN 51130 • R9 standard / R10-R11/R12 on request

Icon Rutschhemmung

Slip resistance

EN 13893 • DS: ≥ 0,30

Icon EPD-Wert

EPD value GWP global warming potentialEPD value GWP global warming potential

according to ISO 14025 and EN 15804 (cradle-to-cradle A – D) in preparation – climate neutral classification expected

Icon Recycling

Contains recycled material

Recyclable

Technical system data

Layer thickness: 2–3 mm
Density: 1.35 kg/dm³
Compressive load: approx. 20 N/mm²
Flexural strength: approx. 14 N/mm²
Adhesive strength: 3 N/mm²
Elongation at break: 130 %

Binder: biopolymer, linseed oil
Set to foot traffic: after 24 hours
Fully cured: after 7 days at 20°C
Hardness: approx. 65 Shore D
Colours: 54 colours, special colours on request

Downloads

Duracem Produktdatenblatt

PDF Download (1,5 MB)

Biopolymere als Bodenbelag

PDF Download (678 KB)

Kundenhinweis

PDF Download (453 KB)

Damit keine unnötigen Kosten entstehen

PDF Download (692 KB)

Duracryl Reinigungs- und Pflegeanleitung (Wohnbereich)

Duracryl Reinigungs- und Pflegeanleitung (Objektbereich)

Lars Knauseder

Lars Knauseder

Distribution

Phone: +49 7195 5909129
Write email

"*" indicates required fields

Send request

I am interested in*
This field is for validation purposes and should be left unchanged.